Advantek Networks (USB 2.0) Manuel d'utilisateur télécharger pdf (Page 50)

PCM-9584 User Manual 40

Chapter 5 PCI Graphic Setup

5.1 Introduction

The PCM-9584 has an onboard PCI/AGP flat panel/VGA interface. The

specifications and features are described as follows:

5.1.1 Chipset

The PCM-9584 uses a Intel Montara-GM/GM+ GMCH chipset for its

graphic controller. It supports LVDS LCD displays, conventional analog

CRT monitors, DVI function.

5.1.2 Display memory

The Intel Montara-GM/GM+ GMCH chip can support up to 64MB

frame buffer shared with system memory; the VGA controller can drive

CRT displays up to 1600 x 1200 at 85-Hz and 2048 x 1536 at 75-Hz,

color panel displays in LVDS model with resolutions up to UGXA panel

resolution with frequency range from 25 MHz to 112 MHz, or DVI model

at a pixel resolution up to 1600 x 1200 at 85 Hz.

5.1.3 Display types

CRT and panel displays can be used simultaneously. The PCM-9584 can

be set in one of six configurations: CRT only, LVDS only, both CRT and

LFP (LVDS), EFP (DVO to DVI), both CRT and EFP (DVO to DVI).

The system is initially set to simultaneous display mode - CRT and LFP

(LDVS). If you want to enable other display mode, please set up manu-

ally. Set up example is shown as in the following chapters.

5.1.4 Dual/Simultaneous Display

The PCM-9584 uses a Intel Montara-GM/GM+ GMCH Chrontel 7017

controller that is capable of providing simultaneous dual view display of

the same content on a flat panel and CRT.

To set up dual view (simultaneous mode) under Windows 9x, Windows

ME, Windows NT/2000/XP, follow these steps:

Step 1. Open the Control panel, and select “Display”.

Step 2. Select “Settings”.

Step 3. Select "Advanced", "Graphic Properties."

Step 4. Select "Devices" mode and click "OK".

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 117 118

Pas de commentaire

Advantek Networks (USB 2.0) Manuel d'utilisateur Page 50